QM INDUSTRIES TAFK17K211ST Flange Block Bearings

T min.:-20 °C; L1:42 mm; L:127 mm; Designation of bearing:UC204-12G2; S:12.7 mm; C0:6.65 kN; N1:19 mm; C:12.8 kN; Z:45 mm; A:38 mm;

S:21.4 mm; A1:15 mm; d:38.1 mm; C0:18.2 kN; A:36 mm; T min.:-20 °C; Recommended tightening torque for set screw:8 Nm; J:102 mm; Weight:2.13 kg; N:16mm;

B:38.1 mm; Weight:2.7 kg; A:56 mm; L:210 mm; s1:36.55 mm; J:160 mm; Designation of bearing:EX307G2L3; N:17mm; L1:60 mm; H1:20 mm;

J:50.8 mm; Recommended tightening torque for set screw:3.7 Nm; C0:7.88 kN; H1:10 mm; S:7.5 mm; s1:24.2 mm; Weight:0.58 kg; Designation of housing:PAE205-; A1:21 mm; H:36.5 mm;

d:40 mm; Precision class:P0; Lw:11 mm; Dw:7.5 mm; C:30 mm; R:500 mm; C0r:125 kN; Max operating temperature, Tmax:120 °C; Radial clearance class:CN; rs min:0.6 mm;

Fatigue limit load, Cu:0.15 kN; ra max:0.3 mm; Characteristic outer ring frequency, BPF0:3.14 Hz; r0 max:0.4 mm; b max:1.65 mm; a min:1.9 mm; Min operating temperature, Tmin:-20 °C; a max:2.06 mm; Ca min:2.92 mm; Mass:0.04 kg;

Characteristic rolling element frequency, BSF:6.41 Hz; Y0:1.96; Characteristic inner ring frequency, BPFI:10.92 Hz; Max operating temperature, Tmax:200 °C; rs min:4 mm; B:144 mm; Mass:77.2 kg; Static load, C0:3,830 kN; da min:237 mm; Da max:383 mm;

Bearing Inner Ring Material:Steel; Grease Type:Unirex N2; Bearing Insert Material:Steel; Flinger Type:Rubberized; Retainer Material:Nylon; Retainer Type:Std Retainer; Shaft Attachment (2):Set Screw; Bearing Outer Ring Material:Steel; d:2.2500 in; Bearing Family:Setscrew Ball Bearin;

Category:Roller Bearings; Manufacturer Name:NTN; C:23.81 mm; Min operating temperature, Tmin:-40 °C; Inventory:0.0; EAN:4547359531107; Brand:NTN; r1a max:3.3 mm; Max operating temperature, Tmax:120 °C; Minimum Buy Quantity:N/A;

Precision class:P0; C0r:4.25 kN; Mass:0.02 kg; Nlim (grease):10,000 rpm; Max operating temperature, Tmax:120 °C; e:16 mm; Brand:NTN; Cr:4.55 kN; D:19 mm; Fw:10 mm;

G:M6x1; T min.:-20 °C; J:56 mm; s1:17 mm; H1:12 mm; Designation of housing:PA205N-; L:84 mm; A:38 mm; A1:23 mm; Z:17.2 mm;

e:38 mm; A1:32 mm; L:210 mm; J:285 mm; C0:86.5 kN; N:38mm; d:80 mm; T max.:100 °C; S:34 mm; A:68 mm;

d:12 mm; H2:62 mm; Designation of bearing:US201G2; B:22 mm; Designation of closed end cover:SCC203; A1:22 mm; T max.:100 °C; Recommended tightening torque for set screw:3.5 Nm; Dz:46 mm; S:6 mm;

S:30 mm; Designation of bearing:UC313-40G2T20; Weight:7.4 kg; s1:37.5 mm; T min.:-20 °C; d:63.5 mm; C:93.86 kN; N:31mm; Designation of housing:FL313-; A1:25 mm;

L:266 mm; G:M10x1; Designation of housing:P214-; B:74.6 mm; H2:156 mm; N:25mm; s1:37.3 mm; Weight:6.65 kg; L1:83 mm; S:30.2 mm;